Filter
Top Products
Fast Ethernet
7100e+
46
Setting up the printer driver
Next, set up the printer software. After adding the printer driver
in WindowsNT 4.0 as the “Default local printer”, perform the
setup.
In the following explanation, setting up OKIPAGE 8c(PS) as the
printer in WindowsNT Server 4.0 is used as an example.
Please have ready the “Printer software CD-ROM”.
Please login with the Administrator’s authorization
and then conduct the setup.
1. Set up the printer driver as the “Default local printer”.
Please refer to the your printer’s user manual for instructions
on how to set up your printer driver.
2. Open the Properties “Port” of the printer driver.
3. Click on “Add port”.
4. Select the “Local Port” and click on “New port”.
Do not select any port other than the “Local Port”.
7100e+.p65 25/08/99, 20:50 PM46