Filter
Top Products
User Manual 19
English
Printing from Windows 95/98
In order to print from Windows 95/98 via TCP/IP, it is necessary
to set up the Fast EtherNet and Windows 95/98. Windows 95/
98 does not include a LPR printing function, so you must use
the OKI LPR utility. This utility can be found on the
accompanying CDROM.
OKI LPR Utility Operating Environment
• A computer which runs Windows 95/98 and which has a
network adapter supporting TCP/IP.
• A compatible printer such as;
• OKIPAGE 16n
• OKIPAGE 20 series
• OKIPAGE 24 series
• OKIPAGE 8c
• OKIPAGE 8c+
The operation of this LPR utility cannot be guaranteed
with any printer other than those specified above..
Configuring Windows98/95
Install “TCP/IP” protocol in Windows98/95 and configure the
IP address, subnet and gateway.
If you type in a wrong IP address, the network may go
down or other severe damage may occur. Make sure
to check with the network manager and to determine
the appropriate address.
In the case that a small-scale LAN is included, such as a network
connecting one printer and one computer, refer to Page 22 for
the settings.
In the following explanation, Window98 is used as an example.
The screen display and part of the contents of the selected
directory may differ, depending on the OS version and the system
structure.
Please have ready the “Windows98/95 System Software CD-
ROM”.
7100e+.p65 25/08/99, 20:49 PM19