Filter
Top Products
Fast Ethernet
7100e+
50
Configuring Macintosh
Change the route for Macintosh AppleTalk to Ethernet.
The following example uses MacOS8.5. The screen shots and
options may vary depending on the OS version and system
configuration.
1 Select [AppleTalk] in [Control Panels] in the Apple menu.
Some OS versions have [Network ] instead of [ AppleTalk ].
2 Under ‘Connect Via:’ Select [Ethernet], then close
[AppleTalk].
For [Network], select [EtherTalk]. Ask your network
administrator about the zone and the AppleTalk address.
3 When the dialogue is displayed, click [Save].
The message varies according to the details of your
modifications.
If the AppleTalk settings on the control panels are
switched to [Ethernet], you will not be able to
connect to any other printers and Macintoshes on
LocalTalk. To connect to LocalTalk, change the
[AppleTalk] settings back to [Printer Port].
7100e+.p65 25/08/99, 20:50 PM50