Filter
Top Products
User Manual 147
English
Problems printing via NetWare
Printer cannot find the Fast EtherNet
· If the printer is on, turn the printer off and then on again.
· Check if the network cable is correctly connected. If needed,
change the cable and try again.
· If the utility related to the Fast EtherNet is used, check if
the NetWare network number of the environment settings is
a valid value. The Fast EtherNet cannot be identified unless
a correct value is typed in. In addition, even in the case of
a large-scale network environment, type in the NetWare
network number in which the Fast EtherNet resides.
· It is possible that the “NetWare protocol” of the Fast
EtherNet is disabled. If it is, change it to “Enable” using
the Fast EtherNet-related utility.
· Turn the printer off, switch on DIP Switch [2] of the Fast
EtherNet and turn the printer on again, initialize the Fast
EtherNet and reset the NetWare Board name, etc.
The Fast EtherNet is identified by the Utility but not by the
NetWare Server
<Remote Server Mode>
· Check if the correct print server is operating on the file
server.
· Check if the “Print server name” operating on the file server and
the “Print server name” set in the Fast EtherNet are identcial.
· Check if the “Printer name” displayed in the print server
monitor of the file server and the “NetWare port name” set
in the Fast EtherNet are identical. If there are several Fast
EtherNets, configure the settings so that the “NetWare port
names” of two Fast EtherNets are not identical.
<Print Server Mode>
· Check if the “File server name” used and the “File server
name” set in the Fast EtherNet are identical.
· Check if the “Printer name” set in the file server and the
“NetWare port name” set in the Fast EtherNet are identical.
If there are several Fast EtherNets, configure the settings so
that no two “NetWare port names” of Fast EtherNets are
identical.
· Check if the “Machine name” of the Fast EtherNet is
identical to the “Print server name” set in the file server.
7100e+.p65 25/08/99, 20:55 PM147