Filter
Top Products
Fast Ethernet
7100e+
74
NetWare 4.1 Print Server Mode (NDS)
NetWare4.1 has an NDS network and a bindery network.
NDS Network
In order to use Netware4.1 print server mode via the NDS network,
it is necessary to set up the file server and Fast EtherNet.
See later in this chapter for:
• using NetWare4.1 print server mode via the bindery
network;
• using NetWare4.1 remote print server mode;
• using Netware3.1.
The following example uses NetWare4. Some of the on-screen
instructions and options may vary depending on the OS version
and system configuration.
In this example, the Fast EtherNet is connected to the NetWare
NDS tree “ODCSOFT”, the admin user context “ENG7”, the
context “SOFT22.ENG7” for creating a print server, and the file
server “SOFT22-NW44”.
Starting PCONSOLE through NDS
For the purpose of this example we will use F: as the network
drive name for logging in to the NetWare server.
1 Go to the context where admin exists ([ENG7] in this
example), using the CX command.
F:\>cx ENG7
2 Log in from the client to the file server ([SOFT22-NW4] in
this example) using the admin authority.
After entering Login, input your password.
F:\>Login SOFT22-NW4/admin
3 Using the CX command, go to the directory in which a print
server, a printer and a print queue is generated ([SOFT22]).
F:\>cx SOFT22
7100e+.p65 25/08/99, 20:50 PM74