Filter
Top Products
User Manual 79
English
7 After all the settings are completed, click [Setup] on the
NetWare Setup screen.
8 If the settings are correct, click [Yes]. The settings will be
transmitted to the Fast EtherNet.
At this point, however, the Fast EtherNet is still operated
using the previous settings.
9 Click [Yes] to reset the device.
If you select [No], the settings will become valid when the
printer is next power cycled. Depending on the printer model
used, you may need to power cycle it.
10 If the print server name you set is displayed on the
[NetWare 4.1 console monitor] of the file server, connection
to the file server is completed.
If it does not appear, try again to set the file server and Fast
EtherNet from the beginning.
<NetWare4.1 Console Monitor>
NetWare 4.10 Console Monitor 4.12
Directory Tree ODCSOFT Server Name: SOFT22-NW4
Server Version: NetWare4.10-1998 March 31
General Information
Server Operating Hours: 30:09:47:40
Status of Use: 0%
-
Active Connections
4 8C-PSERVER
1 SUPERVISOR
3 MIYAMOTO
“Information on Connection” screen from “Available Options”
7100e+.p65 25/08/99, 20:51 PM79