Filter
Top Products
Fast Ethernet
7100e+
36
Printing From WindowsNT 4.0
In order to print from WindowsNT Server 4.0 or WindowsNT
Workstations 4.0, WindowsNT 4.0 and the Fast EtherNet have
to be set up. The TCP/IP protocol and NetBEUI protocol can be
used from WindowsNT 4.0.
The “AppleTalk Printing Devices” output port of
WindowsNT 4.0 is dedicated to postscript printers.
It cannot be used for printers other than postscript
printers.
With the TCP/IP protocol
Configuring the WindowsNT 4.0
Adds the “TCP/IP protocol” and “Microsoft TCP/IP printing”
services to WindowsNT 4.0, sets the IP address, subnet mask
and gateway.
· If you type in a wrong IP address, the network may go
down or other severe damage may occur. Make sure to
check with the network manager and to determine the
appropriate address.
· In the case that a small-scale LAN is included, such as
a network connecting one printer and one computer,
refer to Page 22 for the settings.
· If WindowsNT 4.0 is set, login must be done with the
Administrator’s authorization.
In the following explanation, WindowsNT Server 4.0 is used as
an example. The screen display and part of the contents of the
selected branch may differ, depending on the OS version and
the system structure.
Please have ready the “WindowsNT 4.0 System Software CD-
ROM”.
7100e+.p65 25/08/99, 20:50 PM36