Filter
Top Products
Fast Ethernet
7100e+
72
Printing from NetWare
In order to print using a Novell Netware4.1 or
NetWare3.1network environment, it is necessary to set up the
NetWare server and the Fast EtherNet.
To make the configuration changes it is necessary to have file
server administrator and supervisor authorization. This guide is
intended for NetWare administrators with a basic knowledge of
NetWare and its operating procedures. We suggest you read this
in conjunction with the Novell NetWare manual.
About NetWare
You can print with the printer connected directly to a Novell
NetWare network. For printing using NetWare4.1(NDS mode
and bindery mode) or NetWare 3.1, the Fast EtherNet supports
the following modes.
Print Server Mode
In print server mode: [1] a print job is stored in a print queue on
the file server, [2] a printer running in print server mode will
directly access the print queue and take the job, [3] the printing
process is performed immediately. You do not need to have any
other print server, whether on the file server or in the form of a
workstation, because the printer acts as a print server.
7100e+.p65 25/08/99, 20:50 PM72