Filter
Top Products
User Manual 61
English
4. When no remote spool is set in the HP-UX machine used, set
the following configuration.
1. Stop the printer spooler
#/usr/lib/lpshut
2. Add the following line to the /etc/inetd/conf file and
register the remote spooler
Printer stream tcp nowait root /user/lip/rlpdaemon –I
3. Restart inetd
#/etc/inetd c
5. Register the remote printer
Example: To set the direct output port “lp” with the print
queue “OP8c_lp” and the host “OP8c”
1. Register the remote printer
#/usr/lib/lpadmin pOP8c_lp mrmodel ormOP8c
-orplp ocmrcmodel osmrsmodel ob3 v/dev/
null
2. Activate the print queue
#/usr/lib/accept OP8c_lp
3. Validate the print queue
#/usr/bin/enable OP8c_lp
4. Enable the printer spooler
#/usr/lib/lpsched
7100e+.p65 25/08/99, 20:50 PM61