Filter
Top Products
User Manual 81
English
Creating a Print Queue
1 Select [Print Queues] and press the Enter key.
Available Options
Print Queues
Print Servers
Quick Setup
Change NetWare Server
2 Press the Ins key to input a print queue name to be newly
created (“Q-8C” in this example), then press Enter.
Print Queues
Q-8C
New Print Queue Name: Q8c
A print queue “Q8c” is generated.
Registering Print Server
1 Choose [Print Servers] and press the Enter key.
Available Options
Print Queues
Print Servers
Quick Setup
Change NetWare Server
2 The following message is displayed on the screen. Press the
Enter key to proceed.
You are using bindery emulation on a NetWare 4
server. A DS print server will not be able to
access any configuration done here. If you
intend to run a NetWare 4 print Server on a
NetWare 4 Server, it should be created and
configured in DS mode.
Press <Enter> to continue.
3 Press the Ins key and input a print server name to be newly
generated (“8C-PSERVER” in this example), then press
Enter.
New Print Server Name: 8C-PSERVER
The print server “8C-PSERVER” is registered.
7100e+.p65 25/08/99, 20:51 PM81