Filter
Top Products
User Manual 13
English
The connection process
1. Turn OFF the printer’s power switch
In the case that the network used includes a router
and a server, start the router and the server and only
then turn ON the printer’s power switch. If the
printer’s power switch is turned ON before the router
and the server, the network may not function normally.
2. Insert the twisted pair cable into the Fast EtherNet connector.
3. Insert the other end of the twisted pair cable into the hub/
switch wall socket.
4. Turn ON the printer’s power switch.
7100e+.p65 25/08/99, 20:48 PM13