Filter
Top Products
Basic Operation
3-17
Interrupt Copy
Interrupt copying is useful to pause one copy job and
copy other originals with different copy settings. After
completing the urgent job, you can resume the
interrupted jobs according to their original settings. You
can also pause copy or print jobs to make emergency
copies.
Follow the steps as below to use interrupt copying.
1
Press the Interrupt key.
Interrupt Mode OK will be displayed.
2
Temporarily remove and set aside the original pages of the current job.
3
Place the original for the interrupt job.
4
Specify the copy settings for the interrupt job and press
the Start key.
5
After the interrupt job is completed, remove the originals and press the Interrupt key.
The previous settings will be restored. If there was a job being printed, it will be resumed.
6
Replace the interrupted original and press the Start key to restart the job.