Filter
Top Products
Region number Region
5 Africa, Middle East, rest of Europe
9Invalid
Notes:
• The x and y values represent .xy in the code that appears on the printer control panel.
• The x and y values must match for printing to continue.
Replace jammed originals if restarting job.
Try one or more of the following:
• Touch Cancel job to clear the message and cancel the scan job.
• Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan
job.
• Touch Scan from flatbed to continue scanning from the scanner immediately after the last successful scan job.
• Touch Finish job without further scanning to end the last successful scan job.
• Touch Restart job to restart the scan job with the same settings from the previous scan job.
Replace [x] maintenance kit, 0 estimated pages remain [80.xy]
The printer is scheduled for maintenance. For more information, go to the Lexmark support Web site at
http://support.lexmark.com or contact your service representative, and then report the message.
Replace missing photoconductor [31.xy]
Install the missing photoconductor unit to clear the message. For more information, see “Replacing a photoconductor
unit” on page 213.
Replace missing waste toner bottle [82.xy]
Install the missing waste toner bottle to clear the message. For more information, see the instruction sheet that came
with the supply.
Replace missing cartridge [31.xy]
Install the missing cartridge to clear the message. For more information, see “Replacing the toner cartridge” on page
221.
Troubleshooting 282