Filter
Top Products
For more information about Lexmark, visit www.lexmark.com. General sustainability-related information can be found
at the Environmental Sustainability link.
Storing paper
Use these paper storage guidelines to help avoid jams and uneven print quality:
• For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40 percent. Most
label manufacturers recommend printing in a temperature range of 18–24°C (65–75°F) with relative humidity
between 40 and 60 percent.
• Store paper in cartons, on a pallet or shelf, rather than on the floor.
• Store individual packages on a flat surface.
• Do not store anything on top of individual paper packages.
• Take paper out of the carton or wrapper only when you are ready to load it in the printer. The carton and wrapper
help keep the paper clean, dry, and flat.
Supported paper sizes, types, and weights
The following tables provide information on standard and optional paper sources and the sizes, types, and weights of
paper they support.
Note: For an unlisted paper size, select the closest larger listed size.
Paper sizes supported by the printer
Paper sizes supported by the trays and multipurpose feeder
Paper size Dimensions Standard
500‑sheet
tray (Tray
1)
Standard
500‑sheet
tray (Tray
2)
2 x 500‑
sheet
tray
2500‑sheet
tray
3000‑sheet
tray
Multipurpose
feeder
3
Two‑sided
printing
A4 210 x 297 mm
(8.3 x 11.7 in.)
2 2 2
A5 148 x 210 mm
(5.8 x 8.3 in.)
1 1 1
XX
A6 105 x 148 mm
(4.1 x 5.8 in.)
XXXX X
1
JIS B5 182 x 257 mm
(7.2 x 10.1 in.)
XX
1
Supported only in short‑edge orientation.
2
Supported only in long‑edge orientation.
3
Supports paper size without size sensing.
4
Supported only if the width is from 139.7 mm (5.5 in.) to 320 mm (12.6 in.), and the length is from 148 mm (5.83 in.) to
458 mm (18 in.).
Note: Banner is supported in the multipurpose feeder only if the width is up to 296.9 mm (11.69 in.), and the length is up
to 1219.2 mm (48 in.). Set the paper size to Universal.
Paper and specialty media guide 63