Lexmark 236 All in One Printer User Manual


 
Page Setup
This option lets you change the following settings:
Sides (Duplex)—This specifies if the original document is printed on one side or on both sides of the page (duplex).
This also identifies what needs to be scanned for inclusion in the fax.
Orientation—This specifies the orientation of the original document, and then changes the Sides (Duplex) and
Binding settings to match the orientation.
Binding—This specifies if the original document is bound on the longedge or shortedge side.
Content
This option lets you specify the content type and source of the original document.
Delayed Send
This option lets you send a fax at a later time or date.
Color
This option lets you set the output to either color or monochrome for the scanned image.
Scan Preview
This option lets you view the first page of the image before it is included in the fax. When the first page is scanned, the
scanning is paused and a preview image appears.
Note: This option appears only when a working printer hard disk is installed.
Using the advanced options
Select from the following settings:
Advanced Imaging—This adjusts the Background Removal, Color Balance, Color Dropout, Contrast, Mirror Image,
Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you fax the
document.
Custom Job—This combines multiple scanning jobs into a single job.
Note: This option appears only when a formatted, working printer hard disk is installed.
Edge Erase—This removes smudges or marks around the edges of a document. You can choose to remove an equal
area around all four sides of the paper, or pick a particular edge. Edge Erase erases whatever is within the area
selected, leaving nothing on that portion of the scan.
Transmission Log—This prints the transmission log or transmission error log.
Faxing 111