Lexmark 236 All in One Printer User Manual


 
Hole Punch
Off
On
Specify whether prints have punched holes.
Notes:
Off is the factory default setting.
This menu item appears only when a supported staple, hole punch finisher is installed.
Hole Punch Mode
2 holes
3 holes
4 holes
Specify the number of holes to be made on the prints.
Notes:
3 holes is the U.S. factory default setting. 4 holes is the international factory default
setting.
This menu item appears only when a supported staple, hole punch finisher is installed.
Duplex Binding
Long edge
Short edge
Define binding for two-sided pages in relation to the page orientation of the printed document.
Notes:
Long edge assumes binding along the long edge of the page (left edge for portrait and top
edge for landscape).
Short edge assumes binding along the short edge of the page (top edge for portrait and
left edge for landscape).
Paper Saver Orientation
Auto
Landscape
Portrait
Specify the orientation of a multiplepage document.
Note: Auto is the factory default setting. The printer chooses between portrait and landscape.
Paper Saver
Off
2Up
3Up
4Up
6Up
9Up
12Up
16Up
Specify that multiplepage images be printed on one side of a paper.
Notes:
Off is the factory default setting.
The number selected is the number of page images that are printed per side.
Paper Saver Border
None
Solid
Print a border on each page image.
Note: None is the factory default setting.
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Specify the positioning of multiplepage images.
Notes:
Horizontal is the factory default setting.
Positioning depends on the number of page images and whether they are in portrait or
landscape orientation.
Understanding the printer menus 183