Filter
Top Products
Copy status messages
39
Copy status messages
Copy error messages
Unwanted black lines print on my copy Clean the entire top cover and the document flatbed.
Also clean the automatic document feeder.
Paper does not feed through the automatic
document feeder
Make sure the paper support is open.
Make sure the pages to be copied are not damaged or
stapled together.
Message Description
Ready 100% 1 MFP is set for copy mode. This is the default setting for the control panel.
Copying…
Busy
♦ 100% 1
Copy job is printing. If a copy job is printing, this message appears even
when a fax is being sent or received.
Copy Halted…
Wait 100% 1
Copy job is being canceled.
Place Next
Or Stop
1 Place the next page on the flatbed.
2 Press Go/Send to continue sending pages.
3 Press Stop/Clear to end the scan.
The control panel resets to copy mode and the Ready message appears
on the display.
Error Description
Check
Printer
There is a problem with the printer, such as a paper jam, open door,
missing tray, or toner problem. Check the printer operator panel for a
detailed message.
For more help solving the problem, refer to the documentation that
shipped with the printer.
Check Scanner
Press Return
There is a problem with the scanner.
1 Check that all the cables and power cords are still correctly plugged
into the scanner.
2 Turn off the MFP hardware, then power back up. First, turn on the
scanner, then turn the printer back on.
3 If you are unable to reset the MFP, contact Lexmark Customer Support.
On the MFP CD, click Contact Lexmark.
Problem Solution