Filter
Top Products
Using the scanning bed
43
3 Place the document facedown on the glass and align it with the registration guide on the left
top corner.
Note: Make sure that no other documents are in the automatic document feeder (ADF).
If a document is detected in the ADF, that document is copied before the document
on the glass.
4 Close the document cover.
Note: If you are copying a book or magazine that is thicker than 30 mm, leave the
document cover open.
5 If you are only making one copy, go to step 6 now.
If you are making multiple copies, press Number on the operator panel and use the numeric
keypad to enter the number of copies.
Note: You must press Number before entering the number of copies that you want to
make. If you do not, the machine identifies any numbers you enter directly on the
numeric keypad as a fax number and attempts to fax your document.
6 Customize any copy settings you want to change. For help, see page 45.
7 Press Start.
Note:
• Leaving the cover open while copying may affect the copy quality and toner
consumption.
• Press Stop/Clear to cancel a copy job in progress.
• Clean the document glass regularly. Dust on the document glass may affect
print quality.
ABC