Filter
Top Products
Creating two-sided copies
49
Creating two-sided copies
You can create two-sided copies by using the manual bypass to feed previously copied output pages
back into your machine.
Using the ADF
1 Copy the first side of your original document normally.
Note: Make sure to maintain a consistent orientation when loading documents into the
ADF. If you do not, the reverse side of the document copy could print upside down.
2 Reload your original document into the ADF with the opposite side facing up.
3 Load the previously copied output page into the manual bypass with the previously copied
side facedown, feeding the top edge of the page into the machine first.
4 Press Start.
Using the scanning bed
1 Place your original document on the scanning bed facedown, with the top left corner of the
page aligned with the arrow on the corner of the document glass.
2 Press Start.
3 Place the opposite side of your document on the scanning bed, with the top left corner of the
page aligned with the arrow on the corner of the document glass.
4 Load the previously copied output page into the manual bypass with the previously copied
side facedown, feeding the top edge of the page into the machine first.
5 Press Start.