Lexmark X5400 Series Printer User Manual


 
Increase the fax scan resolution.
CHECK INK
Check the ink levels, and install a new print cartridge if necessary.
Caller ID information is not displayed
C
ALLER ID PATTERN MAY NOT BE SET CORRECTLY
The printer supports two distinct Caller ID patterns: Pattern 1 (FSK) and Pattern 2 (DTMF). Depending on the country
or region you live in and the telecommunications company you subscribe to, you may need to switch the pattern
for the printer to display Caller ID information. For more information, see “Using Caller ID from the software” on
page 106.
Fax Error
The fax machines have stopped communicating.
Resend the fax. There may have been a problem with the quality of the telephone line connection.
Fax Mode Unsupported
The receiving fax machine does not support the type of fax you attempted to send. If it does not support:
Your scan resolution—lower the scan resolution.
1 From the control panel, press Fax Mode.
2 Press .
3 Press or repeatedly until Quality appears.
4 Press .
5 Press or repeatedly until a lower quality appears.
6 Press .
Legal-size paper—reformat the document on letter-size paper.
Remote Fax Error
These are possible causes and solutions. Try one or more of the following:
CHECK PHONE LINE
Resend the fax. There may have been a problem with the quality of the telephone line connection.
LOWER THE TRANSMISSION SPEED
1 From the control panel, press Fax Mode.
2 Press .
3 Press or repeatedly until Fax Setup appears.
4 Press .
Troubleshooting
169