Lexmark X5400 Series Printer User Manual


 
There is a plug installed in the EXT port of the printer. This plug is necessary for the proper functioning of the printer.
Note: Do not remove the plug. If you remove it, other telecommunications devices in your home (such as telephones
or answering machines) may not work.
Choosing a fax connection
You can connect the printer with equipment such as a telephone, an answering machine, or a computer modem. If
problems occur, see “Setup Troubleshooting” on page 128.
Note: The printer is an analog device that works best when directly connected to the wall jack. Other devices (such
as a telephone or answering machine) can be successfully attached to pass through the printer, as described in the
setup steps. If you want a digital connection such as ISDN, DSL, or ADSL, a third-party device (such as a DSL filter) is
required.
You do not need to attach the printer to a computer, but you do need to connect it to a telephone line to send and
receive faxes.
You can connect the printer to other equipment. See the following table to determine the best way to set up the
printer.
Equipment Benefits See this section
The printer
A telephone cord
Send and receive faxes without using a
computer.
“Connecting directly to a telephone
wall jack” on page 32
The printer
A telephone
Two telephone cords
Use the fax line as a normal telephone
line.
Send and receive faxes without using a
computer.
“Connecting to a telephone” on
page 35
The printer
A telephone
An answering machine
Three telephone cords
Receive both incoming voice messages and
faxes.
“Connecting to an answering
machine” on page 31
Setting up the printer
30