Lexmark X738DTE Printer User Manual


 
SMTP Setup menu
Use the following menu to configure the SMTP server.
Menu item Description
Primary SMTP Gateway
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
Specifies SMTP server port information
Note: 25 is the default SMTP gateway port.
SMTP Timeout
5–30
Specifies the amount of time in seconds before the server stops trying
to send the e-mail
Note: 30 seconds is the factory default setting.
Reply Address
Use SSL
Disabled
Negotiate
Required
Specifies server information. This is a required item.
Notes:
The message box has a limitation of 512 characters.
Disabled is the factory default setting for Use SSL.
SMTP Server Authentication
No authentication required
Login / Plain
CRAM-MD5
Digest-MD5
NTLM
Kerberos 5
Specifies the type of user authentication required for scan to e-mail
privileges
Note: “No authentication required” is the factory default setting.
Device-Initiated E-mail
None
Use Device SMTP Credentials
User-Initiated E-mail
None
Use Device SMTP Credentials
Use Session User ID and Password
Use Session E-mail address and Password
Prompt User
Device Userid
Device password
Kerberos 5 Realm
NTLM Domain
Specifies server information
Notes:
The message boxes have a limitation of 512 characters.
None is the factory default setting for Device-Initiated E-mail and
User-Initiated E-mail.
Network Reports menu
This menu is available from the Network/Ports menu:
Understanding printer menus
158