Filter
Top Products
b Touch Copy Quick Test.
The scanner prints a copy of the Quick Test page.
c Touch Flatbed.
d Use the copy of the Quick Test page to adjust the Left Margin and Top Margin settings.
e Touch Submit.
f Touch Copy Quick Test and compare the new copy to the original.
Repeat the flatbed alignment steps until the position on the page of the Quick Test copy closely matches the
original.
To align the ADF:
a Do one of the following:
• To align the ADF front: place the Quick Test page faceup, short edge first into the ADF.
• To align the ADF back: place the Quick Test page facedown, short edge first into the ADF.
b Touch Copy Quick Test.
The scanner prints a copy of the Quick Test page.
c Touch ADF Front or ADF Back.
d Use the copy of the Quick Test page to adjust the Horizontal Adjust and Top Margin settings.
e Touch Submit.
f Touch Copy Quick Test and compare the new copy to the original.
Repeat the ADF alignment steps until the position on the page of the Quick Test copy closely matches the
original.
9 Touch Back.
10 Touch Exit Configuration.
Storing supplies
Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until
you are ready to use them.
Do not expose supplies to:
• Direct sunlight
• Temperatures above 35°C (95°F)
• High humidity above 80%
• Salty air
• Corrosive gases
• Heavy dust
Maintaining the printer
232