LG Electronics Not available Laptop User Manual


  Open as PDF
of 143
 
ENGLISH
114
SuperSign Server
Sync Server Notification
y
The Restart Sync feature is available only in SuperSign W and SuperSign V. If you want to
use this feature, please purchase SuperSign W or SuperSign V.
NOTE
Players that are performing sync playback send notifications to the server when situations such
as playback stoppage or connection loss occur. Users can check notification messages through
their web browsers that are connected to the server.
y
Instant messages cannot be sent to players that are performing sync playback.
y
Players that are performing sync playback are unable to perform the content and instant
message playback management.
y
To enable sync playback, the default time zone of the players you want to sync should be
identical.
y
Sync playback uses the TCP/IP network technology.
y
The IP address assigned to the Master Player must be the same as the one assigned to the
parent network of the slave or the network of the slave.
y
For the Master Player, it is recommended that you use a static IP.
y
If the Master Player's IP is changed after distribution, the slave cannot be connected to the
MasterPlayer.Inthatcase,donotclickthe[SyncRestart]button,butclickthe[SyncDistri-
bution]button,andtryconnectingtheslaveagain.
NOTE
Situation Notification Message
Abnormal shutdown of the sync
playback program
The sync playback program has shut down abnormally.
Please check your sync program.
User shutdown of the sync play-
back program
Sync playback was stopped by the user. If you want to
restartsyncplayback,clickthe[RestartSync]button.
Connection loss of the sync play-
back program
The network connection between sync playback programs
was lost. Please check your network.
Connection standby timeout of the
sync playback program
The sync master exceeded the slave connection standby
time. Please check your network.
 previous next