Filter
Top Products
Checklist
Issue 5 June 1999
A-3
Administered RC download permissions via page 2 of
the Features-Related System-Parameters form by
entering the change system-parameters features
command?
8-9 (Maintenance)
Administered the circuit packs via the add radio
controller
ppcss
command?
2-10
Determined if new firmware is required? If so, called
the INADS Center for a firmware download?
4-2; also, 8-1
(Maintenance)
If required, verified that INADS will do the following:
■ Upgrade the RCs via the upgrade firmware
radio-controller
all
command?
8-10 (Maintenance)
■ Upgrade the WFBs via the upgrade firmware
WFB
all
command?
8-10 (Maintenance)
■ Enable the RC circuit pack for a WT upgrade via
the enable wt-upgrade
ppcss
command?
4-6
Confirmed the correct WT firmware version via the
status wt-upgrade command?
8-10 (Maintenance)
Confirmed the correct RC and WFB firmware version
via the list configuration radio
all
command?
4-1
Upgraded the WT firmware? 4-2
Added the appropriate access code into the WT via
the MENU, Next, Info, “Enter AC” key sequence?
Administered IPEIs from the back of the WT via the
Station form or the soft key button sequence?
2-16
Verified that each WT has icons and can make and
receive calls?
Verified WT upgrades via the list configuration wt
command?
4-1
Verified RC and WFB upgrades via the list
configuration radio command?
4-1
Walked the coverage area to confirm satisfactory
service, and called the SDSC if there are problems?
Table A-1. Checklist of Tasks and Corresponding Description Page References for
Completing a DWBS Installation (continued)
Task: Have you... Page Yes/No