Switch Administration
2-8 Issue 5 June 1999
Figure 2-5. Wireless Carrier Frequencies Form
NOTE:
This form enables the user to limit the radio transmission to a subset
of those carrier frequencies allowable for the DWBS. The form allows
the user to limit radio transmissions without infringing upon any
UTAM restrictions.
16. Submit the form.
17. If the hardware is present, install the RCs. (See Chapter 3, “Hardware
Installation,” for specific information before returning to this step.) If the
hardware is not present, execute the change circuit-packs command for
the port network in which the RC circuit pack will reside.
WIRELESS CARRIER FREQUENCIES
Page 1 of 1
change carrier-frequencies
Customer Carrier Frequencies (MHz)
0: 1929.375 y
1: 1928.125
y
2: 1926.875
y
3: 1925.625 y
4: 1924.375
y
5: 1923.125 y
6: 1921.875 y
7: 1920.625 y