Filter
Top Products
Issue 5 June 1999 4-1
DWBS Testing
Introduction
This section provides you with the background and procedural information needed
to ensure that the installed DWBS is operational.
The tests in this section are in the nature of acceptance tests. The assumption is
that the system will perform as expected after the installation. If problems occur,
or if more extensive tests are required, please refer to the DWBS Maintenance
document.
Verifying Radio Component
Configurations
You must verify that the configurations of the DWBS radio components have the
latest firmware. To do this, issue the commands in the following table:
If you do not have the latest firmware for one or more of the components identified
in the previous table, do the following:
Issue the ... command To check ...
list configuration firmware firmware version stored in the
mass storage system (MSS)
list configuration radio all hardware vintage and firmware
versions of the RCs and WFBs
list configuration wt all hardware vintage, firmware
version, and last access rights of
the WTs