Filter
Top Products
Hardware Installation
3-38 Issue 5 June 1999
Figure 3-20. Mounting Template for Outdoor CAUs
c. Orient the outdoor CAU so that when you are looking at the unit, the
fixed-length coax connector is pointing downward and the antenna
is pointing toward the upper right. Screw the outdoor CAU into
place.
2. Locate an opening in the wall for coax cable passage. Drill a 1/4 in. hole
through the wall, if required.
3. Locate and mount the grounding block on the outside of the building near
the cable opening.
4. Connect one end of a No. 10 copper ground wire to the lug on the
grounding block. Route the wire as straight as possible to an appropriate
building ground (See the previous “Warning.”) Connect the other end of the
ground wire to the building ground using an approved method. (See the
previous “Warning.”)
4.01 in.
6.77 in.
Drill for 1/4 in. screws
(4 places)