Filter
Top Products
Switch Administration
2-10 Issue 5 June 1999
Figure 2-7. System Configuration Form
20. Verify that the Radio Controller value in the
Board Type
field is associated
with the proper slots. If this is not the case, repeat Step 16.
21. For each RC circuit pack logically or physically inserted, execute the add
radio-controller
PPCSS
command to generate the following screen.
NOTE:
PPCSS
indicates the port network, carrier, and slot address where
the circuit pack is located; for example,
01A01
comprises port
network 1, carrier A, slot 01. See the “Radio Controller Circuit Pack
Form Fields” table in this chapter for additional information.
list configuration all
SYSTEM CONFIGURATION
Board
Page 1
Assigned Ports
u=unassigned t=tti p=psa
01B01
Number Board Type Code Vintage
EXPANSION INTRFC 000008
01B02
01B03
01B04
01B07
01B08
AUXILIARY TRUNK
DATA LINE
MAINTENANCE/TEST
TIE TRUNK
DS1 INTERFACE
000005
000012
000006
000006
000006
TN763C
TN726
TN771D
TN760B
TN464F
u u u u
u u u u u u u u
u 02 03 04
01 u u u u u u u
u u u u
01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
TN570
01B05 DID TRUNK TN753 000016
no board u u u u u u u u
u u u u u u u u
u u u u u u u u
17 18 19 20 21 22 23 24
u u u u u u u u
0A uno boardRADIO CONTROLLER01B10
01B06 DS1 INTERFACE