McDATA 4500 Switch User Manual


 
A
A-8
McDATA® Sphereon 4500 Fabric Switch Product Manager User Manual
Product Manager Messages
Message Cannot start port diagnostics.
Description Port diagnostics cannot be started. The link is down or busy.
Action Retry the operation later. If the condition persists, contact support
personnel.
Message Cannot swap an uninstalled port.
Description A port swap cannot be performed when the port is not installed.
Action Perform a swap only on a port that is installed.
Message Click OK to remove all contents from log.
Description Requesting confirmation that you want all contents removed from
the log.
Action Click OK to continue or Cancel to cancel the operation.
Message Continuing may overwrite host programming. Continue?
Description Configurations sent from the host may be overwritten by EFCM.
Action Continuing will activate the current configuration.
Message Could not export log to file.
Description A file I/O error occurred. The log file could not be saved to the
specified destination.
Action Ensure filename and drive are correct.
Message Could not find firmware file.
Description Firmware file selected was not found in the FTP directory.
Action Ensure file name and directory are correct.