Filter
Top Products
Memory transmission
Default setting: ON.
Note: When the machine’s memory is full, it can transmit only through the docu-
ment feeder (real time transmission).
To change the default setting of memory transmission:
1
Press
MENU
,2,2,0,6,
ENTER
. The
LCD
shows:
2
Press or until the mode you want appears.
3
Press
ENTER
to save the setting.
If the
MEMORY TRANSMIT
light glows, memory transmission is on.
If the
MEMORY TRANSMIT
light doesn’t glow, memory transmission is off.
Quick Memory transmission
Default setting: ON.
Important: Your fax machine’s memory transmission feature must be turned on
to use Quick Memory transmission (see above).
To change the default setting of Quick Memory transmission:
1
Press
MENU
,2,2,0,7,
ENTER
. The
LCD
shows:
2
Press or until the mode you want appears.
3
Press
ENTER
to save the setting.
TTI transmission
Default setting: ON.
Every fax page you send arrives at the receiving machine with a single line of text
at the very top of the page. This text lists a name, called the Transmit Terminal
Identifier (
TTI
), and a fax number. You can set the machine to not send the
TTI
.
1
Press
MENU
,2,2,0,8,
ENTER
. The
LCD
shows:
2
Press or until the mode you want appears.
3
Press
ENTER
to save the setting.
TTI Tx :On
$$
/
##
/Enter
Quick Tx :On
$$
/
##
/Enter
Memory Tx :On
$$
/
##
/Enter
Changing the default settings
4.2