Filter
Top Products
Trademarks
Muratec, the Muratec logo and all Muratec fax product names contained herein are
trademarks of Muratec America, Inc. QuardAccess is registered trademark of Muratec
America, Inc.
E
NERGY
S
TAR
is a registered mark of the United States Environmental Protection
Agency.
Copyright
Copyright © 2002 by Muratec America, Inc, All rights reserved.
As an E
NERGY
S
TAR
®
partner, Muratec America, Inc. has deter-
mined that this product meets the E
NERGY
S
TAR
®
guidelines for
energy efficiency. Regarding the outline of E
NERGY
S
TAR
®
, see page
5.17.
Energy saving
Your machine can save the energy with its Energy Saving Mode.
In the Energy Saving Mode the printer will not use its fusing lamp. If your machine
receives a fax message or if any key is pressed your machine will automatically wake
up. The time for the machine to enter the Energy saving mode can be selected from 1 to
240 minutes. For details, see “EasyStart,” page 1.20.
Super G3 is an extension of Group 3 fax technology standards,
allowing the use of high-speed
ITU
-
TV
.34 modems for 33.6 Kbps
transmission and high-speed protocols for rapid handshaking.
JBIG
— Joint Bi-level Image experts Group, the new
ITU
-
T
stan-
dard image data compression method. As
JBIG
compresses the
data more efficiently than
MMR
, it is especially effective when
transmitting halftone (grayscale) image document.
This manual and any updates to it can be found online at www.muratec.com
Go to the “Products” section of this site, then click on “F-320”