Filter
Top Products
2.2
Basic operation
To change the document mode, press
DOCUMENT MODE
. The
LCD
will show:
Press or until the mode you want appears. It will toggle Normal, Fine, S-Fine
and Gray.
Note: You can also toggle them by pressing
DOCUMENT MODE
repeatedly.
Reviewing contrast
Setting the contrast allows you to compensate for any excessive lightness or dark-
ness, as the case may be, of document pages you are sending or copying.
To change the contrast setting, press
CONTRAST
. The
LCD
will show:
Press to be dark, or press to be light.
Note: To avoid confusing the Light and Dark settings, just remember — “Light
lightens” and “Dark darkens” — to keep it straight.
Note: You can also toggle them by pressing
CONTRAST
repeatedly.
Mixing document mode and contrast in a multiple page
When you send a document with more than one page, you can select different docu-
ment modes and contrasts for each page.
Insert your documents, select document mode and contrast for the first page, dial
and press
START
. Before starting to scan the next page, select document mode and
contrast for the next page.
Dialing pause
Some long-distance systems require dialing pauses, and pauses can also be useful
when you’re dialing through special telephone exchanges.
To insert a pause, just press
PAUSE
/
DIAL OPT
.. (The pause character (
-/
) will appear
on the
LCD
.) Each pause entered lasts for a factory-set two seconds.
For example, pressing 9,
PAUSE
/
DIAL OPT
., 0123456789 dials 9 [2-second pause] 0 1 2
3 4 5 6 7 8 9.
Note: You can change the dialing pause length within 2 to 10 seconds.
(see “Changing the dialing pause length,” page 4.5.)
Potential problems with call-waiting and voice mail
Telephone call-waiting signals can stop fax transmission and reception. And any
service — such as voice mail — which may intercept your calls can keep your fax
machine from receiving fax calls.
If you use only one line for both phone and fax, consult your telephone company to
see how you can temporarily disable call-waiting or voice mail while using the fax
machine.
Memory transmission
Your fax machine has a great memory! Take advantage of it, and you could:
Save Time. By using your fax machine’s memory, you won’t have to wait for your
machine while it completes the transmission. Simply scan your document into your
machine’s memory, and you can walk away with your original in hand.
Save Money. If you’re transmitting to another memory-equipped fax machine, your
machine will send the document directly into the other machine’s memory and hang
up. (The receiving machine then prints out your message from its memory after the
call has ended.) This cuts your actual on-line time to a minimum.
Save Even More Money. Set up a delayed transmission (see page 3.10) to send
your document after hours. This allows you to take advantage of cheaper line
charges, saving you even more money.
Note: Some documents use up memory more quickly than others. They include
documents with many pages and those with many dark areas. When the
machine’s memory is full, it can only transmit through the document feeder.
The memory transmission is On for default setting. However, you can turn it off for
the default. (See page 4.2.)
Note: You can override the default setting of memory transmission for only one
transmission by pressing
MEMORY TRANSMISSION
before you send your docu-
ment. After completing the communication, your machine will return to the
default setting.
Set Contrast
Light ·
❚❚
·
""
Dark
Set Document Mode
←←
Normal
→→