Filter
Top Products
1.19
Getting started
5
Use the numeric keypad to enter the correct date and time, using a
MMDDYY
format for the date and 24-hour format for the time. For instance, to set 2:30
PM
on January 27, 2002, press 0 1 2 7 0 2 1 4 3 0, which results in:
Note: Your fax machine automatically inserts the spaces and date-slash. All
you have to do is enter the digits.
To change a digit, press to move the cursor left, or to move it right.
Then enter the correct digit.
6
Press
ENTER
to save the clock setting and continue.
7
The
LCD
now asks if you want to set the calendar/clock to automatically
recognize daylight saving time (
DST
).
When the setting is ON, your machine automatically recognizes
DST
at 2
AM
on
the appropriate switchover Sundays each year.
When the setting is OFF, no automatic change will occur.
8
Press or until the mode you want appears.
9
Press
ENTER
to save the setting and continue.
10
The
LCD
now shows the machine’s current reception mode.
11
For now, select Fax Ready. (This setting can always be changed. We’ll discuss
reception modes further on pages 2.9–2.10.)
12
Press
ENTER
to save the setting and continue.
13
The
LCD
now asks you to enter the type of dialing needed for the fax machine,
either tone or pulse:
14
Press or until the mode you want appears.
15
Press
ENTER
to save the setting and continue.
16
The
LCD
now asks you to enter your fax number as you want it to appear on
other fax machines’ displays or printouts. The fax industry term for this
number is Subscriber
ID
.
17
Use the numeric keypad to enter the fax number. To insert a dash, as shown
here, press
PAUSE
/
DIAL OPT
. once. The number may contain up to 20 charac-
ters (numbers and dashes).
Note: If you make a mistake, press
CANCEL
to erase to the left.
To change just one number, press to move left, or to move right.
Press
CANCEL
to erase the number. Then re-enter the fax number cor-
rectly.
18
Press
ENTER
to save the number and continue.
19
The
LCD
now asks you to enter the name you want to appear at the top of
faxes you send. You can enter three of TTI. The name may be up to 22 charac-
ters in length.
20
Use the numeric keypad to enter characters for TTI 1. (Refer to “Entering
characters” on page 1.12.)
Note: If you make a mistake, press
CANCEL
to erase to the left.
To change just one character in the name, move the cursor by cursor
key. Press
CANCEL
to erase the character. Then re-enter the character
correctly.
21
Press
ENTER
. The
LCD
will show:
If you do not want to enter other TTI, press
ENTER
twice and skip to step 26.
22
Use the numeric keypad to enter characters for TTI 2.
TTI 2 ;Upper
_
TTI 1 ;Upper
_
Your Fax Number
972-555-5525_
Your Fax Number
Dialing Type :Tone
$$
/
##
/Enter
Fax Ready
$$
/
##
/Enter
Daylight Saving :Off
$$
/
##
/Enter
Enter Time
0
1/27 ’02 14:30