Filter
Top Products
Bypass Tray priority
If you set the same sized paper to both the paper cassette and bypass tray, and this
mode is turned to on, the machine gives priority to use the paper which is set on the
bypass tray than the paper in the cassette.
To adjust the copy print settings
Default setting: Copy reduction rate: 100%, Margin: 24 mm, Bypass tray priority: Off
1
Press
MENU
,2,3,2,
ENTER
. The
LCD
shows the current reduction rate for copy-
ing:
2
Press or until the reduction setting you want appears.
3
Press
ENTER
to save the setting. The
LCD
shows the current print margin:
4
Use the numeric keypad to enter the print margin you want. If necessary,
press or to move the cursor.
5
Press
ENTER
to save the setting. The
LCD
shows the current setting for bypass
tray priority:
6
Press or until the setting you want appears.
7
Press
ENTER
to save the setting.
Bypass Priority :Off
$$
/
##
/Enter
Margin
(00-85) 24 mm
Prt Reduc.Rate :100%
$$
/
##
/Enter
Changing the default settings
4.7