Filter
Top Products
ETU400 User Guide 011603
10-20
PRTTO3X Command
Parameter description Parameter name Parameter values
Qualified file name QFNAME micro file name
Output queue OUTQ host output queue
name
Library name *LIBL
library name
Lines per page LINES 66
lines per page
Lines per inch LPI 6
lines per inch
Characters per inch CPI 10
characters per
inch
Form width WIDTH 132
form width
Overflow line number OVERFLOW 63
overflow line
Type of form label FORMTYPE *STD
forms type
Number of copies COPIES 1
number of copies
Place job on hold? HOLD *NO or *YES
Translation table name TRANSFILE TRANSLATE
file name
Library name *LIBL
library name
Translation table member
name
TRANSMBR ATOE3
member name
The PRTTO3X command is an interactive command that transfers PC-DOS print
files from the PC to the AS/400, and adds them to the AS/400 print queue.
Mac Users: Do not run this procedure. It is intended for use only with
PC-DOS.
QFNAME1 The name of the micro file to be moved to the AS/400. For
additional information, see About Microcomputer Files, in
Chapter 3.
OUTQ The output queue name where the new print item is placed when
it is transferred from the micro.
Library The library containing the output queue. *LIBL is the
default library name.
LINES The number of lines per page for the new print job being
added to the AS/400 print queue. The default is 66.
LPI The number of lines per inch to allocate to the new print job
being added to the AS/400 print queue. The default is 6.
CPI The number of characters per inch to allocate to the new
print job being added to the AS/400 print queue. The default
is 10.
WIDTH The width of the forms being printed. Valid entries are 1
through 198. The default value is 132.