Filter
Top Products
ETU400 User Guide 011603
D-15
If you need to insert a line, enter I1 in the first two positions of the
line number that will precede the new line. For example, enter I1 over
line number 0003.00 to insert a new line following line 0003.00.
15. Press F3 to complete the F & I specification. The SEU Exit screen
appears as shown in Figure D-9. Verify that the Change/create member
parameter is Y for yes. Also verify that the member name and the library
name on this screen are correct, and then press ENTER. You will be
returned to the AS/400 screen you were at prior to issuing the SEU
command.
The F&I specification called SAMPLE for the demo file called ETUFILE is
now defined. You can now use this F&I definition to transfer the file
using ETU.
Figure D-9 The SEU Exit screen
Exit
Type choices, press Enter.
Change/create member . . . . . . . Y Y=Yes, N=No
Member . . . . . . . . . . . . . SAMPLE Name, F4 for list
File . . . . . . . . . . . . . . QRPGSRC Name, F4 for list
Library . . . . . . . . . . . . QGPL Name
Text . . . . . . . . . . . . . .
Resequence member . . . . . . . . Y Y=Yes, N=No
Start . . . . . . . . . . . . . 0001.00 0000.01-9999.99
Increment . . . . . . . . . . . 01.00 00.01-99.99
Print member . . . . . . . . . . . N Y=Yes, N=No
Return to editing . . . . . . . . . N Y=Yes, N=No
Go to member list . . . . . . . . . N Y=Yes, N=No
F3=Exit F4=Prompt F5=Refresh F12=Cancel
For more information about F&I specifications, please refer to the IBM
AS/400 Languages: Systems Application Architecture AD/Cycle RPG/400
Reference Manual SC09-1349-00.