Filter
Top Products
ETU400 User Guide 011603
10-38
currently exists on the micro.
ADDRPL For transfers to existing files: indicates whether the
transferred file will replace the data in the file or be
added to it. The default is *REPLACE. To add to the existing
data, specify *ADD.
FILETYPE The type of TOFILE file, if the host file is to be created
with this command.
*DATA A physical file is created. RECL or FLDDEFFILE is
used to create the data file. (This is the
default.)
*SAVE Permits offline storage, and moves executable
programs between micros. A record length (RECL)
of 1024 is required and TRANSLATE must be *NONE.
All necessary data (including Mac data and
resource forks) is transferred. Data is not
translated to EBCDIC, and therefore cannot be
used on the host. To restore data to the micro,
use the FROM3XB command with the SAVTYPE
parameter.
*SRC A source physical file is created. If *SRC is
used, 12 bytes will be added to the value in
RECL.
*SAVF A save file is created. A record length (RECL)of
528 bytes is required and TRANSLATE must be
*NONE.
NOTE: To create a *SAVF object, you must be authorized to execute the
CRTSAVF command.
SRCSEQ Determines whether a 12-byte source sequence number and date
field is to be written in the first 12 bytes of the record.
This allows the translated record to be read by the AS/400
Source Entry Utility (SEU). This parameter also affects the
actual record length of the file. If you specify *YES for
this parameter, you must add 12 positions to the figure in
RECL.
*NO Do not add the sequence number/date field. The record
length is equal to that specified (the default).
*YES Add the sequence number/date field. Actual record
length will be 12 greater than the record length specified in
the RECL parameter.
Note that SRCSEQ can be specified even if the file is not
translated, in which case untranslated data would be
sequenced.
TRUNCATE For *TEXT translations only: Specifies whether the text is to
be truncated or folded in the event that the length of the
file is longer than the record length specified in the
parameter RECL.
*NO The data is folded (this is the default).