Filter
Top Products
ETU400 User Guide 011603
D-4
To create an F&I specification for a file, use the Source Entry Utility
(SEU) on the AS/400. The steps below and on the following pages describe
how to create F & I specs for the file shown on the previous page.
1. Sign on to the AS/400.
2. Enter STRSEU on the command line of the AS/400, and then press F4. The
Start Source Entry Utility (STRSEU) screen, shown in Figure D-2, appears.
If you receive an error after this command, you may not have the
authority to perform this task. See your system administrator.
Figure D-2 The Start Source Entry Utility screen
Start Source Entry Utility (STRSEU)
Type choices, press Enter.
Source file . . . . . . . . . . QRPGSRC Name, *PRV
Library . . . . . . . . . . . QGPL Name, *LIBL, *CURLIB, *PRV
Source member . . . . . . . . . SAMPLE Name, *PRV, *SELECT
Source type . . . . . . . . . . RPG Name, *SAME, BAS, BASP...
Option . . . . . . . . . . . . . *BLANK *BLANK, ' ', 2, 5, 6
Text 'description' . . . . . . . *BLANK
Bottom
F3=Exit F4=Prompt F5=Refresh F12=Cancel F13=How to use this display
F24=More keys
3. Define the file containing the F & I specifications by entering the
following information, and then press Enter.
Enter QRPGSRC for the source file name. QRPGSRC is a system file which
contains source for F&I specs.
Enter QGPL for the library name. QGPL is a system library.
Enter SAMPLE for the source member name.
Enter RPG for the source type. The source for F&I specs is always RPG.
Text 'description' is an optional field you can use to identify the F&I
source member.