Filter
Top Products
Using the BayStack 410-24T 10BASE-T Switch
3-8
309985-A Rev 00
Figure 3-3. IP Configuration/Setup Screen
Table 3-2 describes the IP Configuration/Setup screen fields.
Note:
The read-only fields in this screen are updated based on the BootP mode
specified in the BootP Request Mode field. (See “
Choosing a BootP Request
Mode” on page 3-10 for more information.)
Table 3-2. IP Configuration/Setup Screen Fields
Field Description
BootP Request
Mode
One of four modes of operation for BootP. (See “
Choosing a BootP Request Mode” on
page 3-10
for details about the four modes.)
Default Value BootP Disabled
Range BootP Disabled, BootP or Last Address, BootP When Needed, BootP
Always
(continued)
IP Configuration/Setup
BootP Request Mode: [ BootP Disabled ]
Configurable In Use Last BootP
------------------- --------------- ---------------
In-Band Stack IP Address: [ 0.0.0.0 ] 0.0.0.0
In-Band Switch IP Address: [ 0.0.0.0 ] 0.0.0.0
In-Band Subnet Mask: [ 0.0.0.0 ] 0.0.0.0 0.0.0.0
Default Gateway: [ 0.0.0.0 ] 0.0.0.0 0.0.0.0
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.