Filter
Top Products
Using the BayStack 410-24T 10BASE-T Switch
5-4
309985-A Rev 00
MDI-X to MDI-X Cable Connections
If you are connecting the BayStack 410-24T switch to a device that also
implements MDI-X ports, use a crossover cable (Figure 5-3
).
Figure 5-3. MDI-X to MDI-X Cable Connections
DB-9 (RS-232-D) Console/Comm Port Connector
The DB-9 Console/Comm Port connector (Figure 5-4) is configured as a data
communications equipment (DCE) connector. The DSR and CTS signal outputs
are always asserted; the CD, DTR, RTS, and RI signal inputs are not used. This
configuration enables a management station (a PC or console terminal) to connect
directly to the switch using a straight-through cable.
Figure 5-4. DB-9 Console/Comm Port Connector
1818
81 81
RX+
RX-
TX+
TX-
RX+
RX-
TX+
TX-
MDI-X port
BayStack 410-24T switch Switch or hub
Crossover cable MDI-X port
T
R
T
R
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
BS41060A
5
6
9
1
619EA