Filter
Top Products
Using the Console Interface
309985-A Rev 00
3-37
Figure 3-14. Port Configuration Screen (2 of 2)
Table 3-14 describes the
Port Configuration screen fields.
Table 3-14. Port Configuration Screen Fields
Field Description
Unit
Allows you to select the unit number (when stacking is configured) to view or
configure. To view or configure another unit, type its unit number and press [Enter], or
press the spacebar to toggle the unit numbers.
Port
Indicates the switch port numbers that correspond to the field values in that row of
the screen (for example, the field values in row 2 apply to switch port 2). The values
that you set in the
Switch
row will affect all switch ports and, when the switch is part
of a stack, the values that you set in the
Stack
row will affect all ports in the entire
stack.
Trunk
The read-only data displayed in this column indicates the trunks that correspond to
the switch ports specified in the Trunk Members fields of the Trunk Configuration
screen (see ““
MultiLink Trunk Configuration” on page 3-41).
(continued)
Port Configuration
Unit: [ 1 ]
Port Trunk Status Link LnkTrap Autonegotiation Speed Duplex
---- ----- ------------ ----- ------- --------------- -----------------
15 [ Enabled ] Down [ Off ] [ Disabled ] [ 10Mbs / Full ]
16 [ Enabled ] Down [ Off ] [ Disabled ] [ 10Mbs / Full ]
17 1 [ Enabled ] Up [ On ] [ Enabled ] [ 100Mbs / Full ]
18 [ Enabled ] Down [ On ] [ Disabled ] [ 100Mbs / Half ]
19 3 [ Enabled ] Up [ On ] [ Enabled ] [ 100Mbs / Full ]
20 3 [ Enabled ] Up [ On ] [ Enabled ] [ 100Mbs / Full ]
21 [ Enabled ] Up [ On ] [ Enabled ] [ 100Mbs / Half ]
22 4 [ Enabled ] Up [ On ] [ Enabled ] [ 100Mbs / Full ]
23 4 [ Enabled ] Up [ On ] [ Enabled ] [ 100Mbs / Full ]
24 [ Enabled ] Down [ On ] [ Disabled ] [ 10Mbs / Half ]
25 [ Enabled ] Up [ Off ] [ Enabled ] [ 100Mbs / Half ]
26 [ Enabled ] Up [ Off ] [ Disabled ] [ 100Mbs / Half ]
27 [ Enabled ] Down [ Off ] [ Disabled ] [ 100Mbs / Half ]
28 [ Enabled ] Down [ On ] [ Disabled ] [ 100Mbs / Half ]
Switch [ Enable ] [ On ] [ Enabled ] [ 100Mbs / Half ]
Press Ctrl-P to display choices for ports 1-14.
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.