Nortel Networks 10BASE-T Switch User Manual


 
Using the BayStack 410-24T 10BASE-T Switch
1-46
309985-A Rev 00
The connection to switch S2 requires only one link because both switch S1 and
switch S2 (BayStack 410-24T switches) support 802.1Q tagging (see “VLANs
Spanning Multiple 802.1Q Tagged Switches” on page 1-37).
Figure 1-29. VLAN Configuration Spanning Multiple Switches
BayStack 410-24T
Untagged ports
(STP disabled)
Both ports are tagged
members of VLAN 1
and VLAN 2
BayStack 410-24T
Non-802.1Q
tagging switch
BS41025A
Key
VLAN 1 (PVID=1)
VLAN 2 (PVID=2)
VLAN 3 (PVID=3)
S1
S2
S4
S3
V1
V2 V2 V1
V2
V3
Non-802.1Q
tagging switch