Nortel Networks 10BASE-T Switch User Manual


 
Default Settings
309985-A Rev 00
5-3
Autonegotiation Enabled (for all ports
)
Speed/Duplex 100Mbs/Half (when
Autonegotiation is Disabled)
MultiLink Trunk Configuration
(page 3-41)
Trunk Members (Unit/Port) Zero-length string
STP Learning Normal
Trunk Mode Basic
Trunk Status Enabled
Trunk Name Trunk #1 to Trunk #6
MultiLink Trunk Utilization (page 3-45) Traffic Type Rx and Tx
Port Mirroring Configuration (page 3-48) Monitoring Mode Disabled
Monitor/Unit Port Zero-length string
Unit/Port X Zero-length string
Unit/Port Y Zero-length string
Address A 00-00-00-00-00-00
(no MAC address assigned)
Address B 00-00-00-00-00-00
(no MAC address assigned)
Rate Limiting Configuration (page 3-52) Packet Type Both
Limit None
IGMP Configuration Menu (page 3-55) VLAN 1
Snooping Enabled
Proxy Enabled
Robust Value 2
Query Time 125 seconds
Set Router Ports Version 1
Static Router Ports - (for all ports)
Port Statistics (page 3-61) Unit 1
Port 1
(continued)
Table 5-1. Factory Default Settings for the BayStack 410-24T Switch
(continued)
Appears in this CI screen Field Default setting