Filter
Top Products
Web OS 10.0 Application Guide
114
Chapter 5: Secure Switch Management
212777-A, February 2002
NOTE – Port mirroring and bandwidth management cannot be enabled at the same time.
To configure port mirroring for the example shown in Figure 5-2,
1. Specify the monitoring port.
2. Select the ports that you want to mirror.
3. Enable port mirroring.
4. Apply and save the configuration.
5. View the current configuration.
>> # /cfg/pmirr/monport 5 (Select port 5 for monitoring)
>> Port 5 # add 1 (Select port 1 to mirror)
>> Enter port mirror direction [in, out, or both]: in
(Monitor ingress traffic on port 1)
>> Port 5 # add 3 (Select port 3 to mirror)
>> Enter port mirror direction [in, out, or both]: out
(Monitor egress traffic on port 3)
>> # /cfg/pmirr/mirr ena
(Enable port mirroring)
>> PortMirroring# apply (Apply the configuration)
>> PortMirroring# save (Save the configuration)
>> PortMirroring# cur (Display the current settings)
Port mirroring is enabled
Monitoring Ports
Mirrored Ports
1
none
2 none
3 none
4 none
5 (1, in) (3, out)
6 none
7 none
8 none
9 none