Filter
Top Products
Web OS 10.0 Application Guide
Chapter 4: OSPF
91
212777-A, February 2002
3. Define the backbone.
4. Define the stub area.
5. Attach the network interface to the backbone.
6. Attach the network interface to the stub area.
7. Configure route summarization by specifying the starting address and mask of the range
of addresses to be summarized.
8. Use the hide command to prevent a range of addresses from advertising to the backbone.
9. Apply and save the configuration changes.
>> Open Shortest Path First # aindex 0 (Select menu for area index 0)
>> OSPF Area (index) 0 # areaid 0.0.0.0 (Set the ID for backbone area 0)
>> OSPF Area (index) 0 # type transit (Define backbone as transit type)
>> OSPF Area (index) 0 # enable (Enable the area)
>> OSPF Area (index) 0 # ../aindex 1 (Select menu for area index 1)
>> OSPF Area (index) 1 # areaid 0.0.0.1 (Set the area ID for OSPF area 1)
>> OSPF Area (index) 1 # type stub (Define area as stub type)
>> OSPF Area (index) 1 # enable (Enable the area)
>> OSPF Area (index) 1 # ../if 1 (Select OSPF menu for IP interface 1)
>> OSPF Interface 1 # aindex 0 (Attach network to backbone index)
>> OSPF Interface 1 # enable (Enable the backbone interface)
>> OSPF Interface 1 # ../if 2 (Select OSPF menu for IP interface 2)
>> OSPF Interface 2 # aindex 1 (Attach network to stub area index)
>> OSPF Interface 2 # enable (Enable the stub area interface)
>> OSPF Interface 2 # ../range 1
(Select menu for summary range)
>> OSPF Summary Range 1 # addr 36.128.192.0
(Set base IP address of summary range)
>> OSPF Summary Range 1 # mask 255.255.192.0
(Set mask address for summary range)
>> OSPF Summary Range 1 # aindex 0
(Inject summary route into backbone)
>> OSPF Summary Range 1 # enable
(Enable summary range)
>> OSPF Interface 2 # ../range 2
(Select menu for summary range)
>> OSPF Summary Range 2 # addr 36.128.200.0
(Set base IP address)
>> OSPF Summary Range 2 # mask 255.255.200.255
(Set mask address)
>> OSPF Summary Range 2 # hide enable
(Hide the range of addresses)
>> OSPF Summary Range 2 # apply
(Global command to apply all changes)
>> OSPF Summary Range 2 # save
(Global command to save all changes)