Filter
Top Products
Web OS 10.0 Application Guide
Chapter 13: Firewall Load Balancing
333
212777-A, February 2002
Configure Connectivity for the Secondary Dirty-Side Web Switch
Except for the IP interfaces, this configuration is identical to the primary dirty-side Web switch.
1. Configure VLANs on the secondary dirty-side Web switch.
2. Configure IP interfaces on the secondary dirty-side Web switch.
3. Turn STP off for the secondary dirty-side Web switch.
4. Configure static routes on the secondary dirty-side Web switch.
5. Apply and save your configuration.
>> # /cfg/vlan 2
>> # add 2
>> # add 9
>> # ena
>> # /cfg/ip/if 1
>> # mask 255.255.255.0
>> # addr 195.1.1.11
>> # ena
>> # ../if 2
>> # mask 255.255.255.0
>> # addr 10.10.2.11
>> # vlan 2
>> # ena
>> # ../if 3
>> # mask 255.255.255.255
>> # addr 10.10.2.12
>> # vlan 2
>> # ena
>> # /cfg/stp/off
>> # /cfg/ip/frwd/route
>> # add 10.10.3.1 255.255.255.255 10.10.2.3 2
>> # add 10.10.3.2 255.255.255.255 10.10.2.4 3
>> # add 10.10.3.11 255.255.255.255 10.10.2.3 2
>> # add 10.10.3.12 255.255.255.255 10.10.2.4 3
>> # apply
>> # save
>> # /boot/reset