Filter
Top Products
Web OS 10.0 Application Guide
218
Chapter 9: Virtual Matrix Architecture
212777-A, February 2002
Frames ingressing a port that has been configured with a proxy IP address and the proxy
option enabled (/cfg/slb/port x/proxy ena) can be processed using a proxy IP
address by any switch port. The client source address is substituted with the proxy IP address
of the port processing the request.
Frames ingressing switch ports that have been configured with a proxy IP address, but do not
have the proxy option enabled, is processed by other ports that have been configured with a
proxy IP address; but the client source address will not be replaced with a proxy IP address
before it is forwarded to a server.
NOTE – VMA must be enabled if you are setting up Firewall Load Balancing (FWLB) with
clean-side switches performing server load balancing (SLB) or URL-based SLB and Direct
Access Mode (DAM) is enabled.
>> # /cfg/slb/port 1/pip 10.10.10.10 (Proxy IP for NAT, etc.)
>> # /cfg/slb/port 1/pip 10.10.10.11/proxy ena (Turns on address proxying)
>> # /cfg/slb/port 2/pip 10.10.10.11/proxy dis (Turns off address proxying)
>> # /cfg/slb/port 3/pip 10.10.10.12/proxy dis
>> # /cfg/slb/port 4/pip 10.10.10.13/proxy dis
>> # /cfg/slb/port 5/pip 10.10.10.14/proxy dis
and so on....