Filter
Top Products
Web OS 10.0 Application Guide
464
Chapter 17: Bandwidth Management
212777-A, February 2002
3. Configure a real server to handle the URL request.
To add a defined string:
where URL path ID is the identification number of the defined string as displayed when you
enter the cur command.
Example: /cfg/slb/real 2/layer7/addlb 3
4. Either enable Direct Access Mode (DAM) on the switch or configure a proxy IP address
on the client port.
NOTE – If VMA is enabled and you are using a proxy IP address, you need to configure proxy
IP addresses on ports 1 through 8.
To turn on DAM:
To turn off DAM and configure a proxy IP address on the client port:
NOTE – By enabling DAM on the switch or, alternatively, disabling DAM and configuring a
proxy IP address on the client port, port mapping for URL-based server load balancing can be
performed.
>> # /cfg/slb/real 2/layer7/addlb <URL path ID>
>> # /cfg/slb/adv/direct ena
>> # /cfg/slb/adv/direct dis
>> # ../port 2/pip 12.12.12.12
>> # proxy ena