Filter
Top Products
Web OS 10.0 Application Guide
Chapter 4: OSPF
81
212777-A, February 2002
To configure OSPF passwords on the Web switches shown in Figure 4-4 use the following
commands:
1. Enable OSPF authentication for Area 0 on Web switches 1, 2, and 3.
2. Configure a simple text password up to eight characters for each OSPF IP interface in
Area 0 on Web switches 1, 2, and 3.
3. Enable OSPF authentication for Area 2 on Web switch 4.
4. Configure a simple text password up to eight characters for the virtual link between Area
2 and Area 0 on Web switches 2 and 4.
>> # /cfg/ip/ospf/aindex 0/auth password
(Turn on OSPF password authenti-
cation)
>> # /cfg/ip/ospf/if 1
>> OSPF Interface 1 # key test
>> OSPF Interface 1 # ../if 2
>> OSPF Interface 2 # key test
>> OSPF Interface 1 # ../if 3
>> OSPF Interface 3 # key test
>> # /cfg/ip/ospf/aindex 2/auth password
(Turn on OSPF password authenti-
cation)
>> #
/cfg/ip/ospf/virt 1/key alteon